The ScottoSlant is a 37-key handwired 0.25u row-staggered keyboard with a 2u spacebar. The board was partially inspired by the Pain27 but a bit more usable as a daily driver. It’s also my first board to use a stabilizer, which took many hours and prototypes to get working without jamming. I decided to use stock Gateron Robin switches and an NK Silk Yellow for the spacebar. I’m actually a fan of the slight scratchy sound the Robin switches make, although it’s definitely not for everyone. Keycaps are DSA Black & White from Pimp My Keyboard.
If you’re interested in getting one assembled, contact me and we can discuss the components and other details for a commissioned build. However, the files are available for free here if you want to build one yourself.
- 1 Arduino Pro Micro
- 37 1N4148 diodes
- 9 M2x8mm standoffs
- 18 M2x6mm screws
- 1 2u plate mount stabilizer
- 37 MX switches
- 36 1u keycaps
- 1 2u keycap
When looking at the back of the board, the columns (blue) go to the following pins on the controller from right to left: 2, 3, 4, 5, 6, 7, 8, 9, A3, A2
Then the rows (red) go from top to bottom: 15, 14, 16, 10
Keep in mind, you can connect anywhere on the column or row to the controller, it doesn't need to just be at the end.
You can find the firmware files on the qmk_firmware repository or you can compile them online using the QMK Configurator. However, QMK is often slow at getting changes merged and because of that you can find the most up-to-date firmware on the ScottoKeebs Github repository. Also available are the pre-compiled firmware files that you can simply download (right click, save as) and flash using QMK Toolbox:
After flashing vial.hex, you should load the vial.vil configuration file within the Vial application to ensure everything functions as expected.