The Scotto34 (PCB Edition) is a low-profile 34-key split monoblock ortholinear keyboard that uses 18x17mm spaced Choc switches, hotswap sockets, and an exposed controller in the middle. It uses Kailh Choc Robin switches and 18x17mm spacing for the keycaps. The switches are in my top 3 all-time favorites and the board has been my daily driver for a few months now.
Getting One
If you’re interested in getting one assembled, contact me and we can discuss the components and other details for a commissioned build. However, most of the parts to build one yourself are available on ScottoKeebs:
- 1 Scotto34 PCB kit
- 1 Scotto34 3D printed case
- 1 Raspberry Pi Pico
- 1 pin-socket header set
- 34 Choc switches
- 34 1u keycaps
If you print the case yourself, you will also need:
- 8 M2x4mm Standoffs
- 8 M2x3mm Screws
- 8 M2x4mm Screws
The 3D printed case is optional as the board can be built with just the PCB kit to be as low-profile as possible.
Firmware
You can find the firmware files on the qmk_firmware repository or you can compile them online using the QMK Configurator. However, QMK is often slow at getting changes merged and because of that you can find the most up-to-date firmware on the ScottoKeebs Github repository. Also available are the pre-compiled firmware files that are ready to flash:
default.uf2 - Default QMK keymap in QWERTY.
vial.uf2 - Default QMK keymap in QWERTY with Vial configurator support.
scotto.uf2 - My personal QMK keymap in Colemak.
After flashing vial.uf2, you should load the vial.vil configuration file within the Vial application to ensure everything functions as expected.
Video
Photos