Scotto34 PCB Kit

This is a PCB kit for the Scotto34 keyboard and is compatible with 18x17mm spaced Choc switches, both V1 and V2. It is plateless meaning the PCB is the keyboard but if you want, you can find a 3D printed case here.

The kit includes the following:

• 34 surface-mount diodes
• 34 Choc hotswap sockets
• Scotto34 PCB

You will need the following to complete the build:

• 34 Choc switches
• 34 Choc keycaps (18x17mm)
• 1 Raspberry Pi Pico
• 1 pin-socket header set
• 1 3D printed case (optional)

The 3D printed case is optional as the board can be built with just the PCB to be as low-profile as possible. However, since I release all my handwired boards for free I do not release any files other than firmware for my PCB boards. Please be aware that the only way to get a 3D printed case is by purchasing one through me, thank you for understanding.

Firmware

You can find the firmware files on the qmk_firmware repository or you can compile them online using the QMK Configurator. You can also download pre-compiled firmware here.

Note that although the PCB is compatible with V2 Choc switches, keycaps that support 18x17mm spacing aren't that common. Please keep this in mind if you plan on using V2 choc switches.