ScottoTeq
The ScottoTeq is a trackpad using the Azoteq TPS43 or TPS65 module. I designed it to test out the Azoteq trackpad as an alternative to the Cirque I used in the ScottoCirque a few months back. Unlike the Cirque, the Azoteq trackpads feature gestures such as 2-finger tap for right click and scrolling along with tapping and holding to drag. The pointing experience is slightly less nice than the Cirque but the tradeoff of the gestures make me prefer it overall.
Getting One
If you’re interested in getting one assembled, contact me and we can discuss the components and other details for a commissioned build. However, the files are available for free here if you want to build one yourself.
In addition to the 3D printed case and wire, you'll also need tools along with the following components:
- 1 RP2040 Pro Micro
- 1 Azoteq TPS43 or TPS65
- 4 M2x4mm screws
Wiring

Simply connect the I2C and VCC connections to your microcontroller:
- VCC -> 3V3
- GND - > GND
- GP2 -> RDY
- GP6 -> SDA
- GP7 -> SCL
Firmware
You can find the firmware files on the qmk_firmware repository or you can compile them online using the QMK Configurator. However, QMK is often slow at getting changes merged and because of that you can find the most up-to-date firmware on the ScottoKeebs Github repository. Also available are the pre-compiled firmware files that are ready to flash:
default.uf2 - Default QMK keymap.
Video
Coming soon...
Photos
